Downloads for LLEAP - Laerdal Learning Application

SimStart User Guide

3,4 MB - English
10/01/20

Simulated AED or Monitor Defibrillator training functionality available in Laerdal Learning Application- LLEAP

Quick Guide WiFi setup

1,2 MB - English
24/06/19

Session Viewer - User Guide

2,7 MB - Multilingual
10/07/15

Laerdal Network Requirement Document

0,5 MB
10/11/20

This document describes the requirements for setting up a network on pre-existing infrastructure specifically for Laerdal simulation devices. Replaces LLEAP IT & Network Information document

Laerdal Learning Application (LLEAP) v. 7.2.0

1 657,3 MB
04/11/20

Changes in this release:

• Changed authentication provider to align with changes in Scenario Cloud.
• Added an alert for PC or tablet users of Windows 7 as it will no longer be supported for new releases in 2021.
• Improved discovery of manikins and patient monitors.
• Improved handling of updates and configuration for SimMan 3G.
• Fixed an issue where the name of SimMan 3G could not be changed.
• Fixed an issue where the SpO2 vital parameter did not disappear as expected.
• Fixed an issue where the "Ok" button would not allow you to proceed in the theme selection dialog.
• Improved handling of log files for SimMan 3G.
• Removed Shockwave Flash.
• General maintenance, bugfixes, and improvements.

 

Important:

• Once upgrading to 7.2.0 with Scenario Cloud the organization account is transferred to a new login authentication system and so cannot revert back to 7.1.0 or earlier.

 

• Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location: Microsoft Visual C++ 2015 Redistributable Update 3 . Select and run vc_redist.x86 then try running LLEAP.

 

Note:

Updating to Windows 10?

• Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
  • Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.

Windows 7

• By the end of 2020 new releases of LLEAP will no longer support Windows 7

Laerdal Patient Monitor v. 7.2.0

911,7 MB
04/11/20

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad.

Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.

 

New version to align with LLEAP 7.2.0

 

Changes in this release:

• Fixed an issue where the SpO2 vital parameter did not disappear as expected.

 

Note:

Updating to Windows 10?

• Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
  • Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.

Windows 7

• By the end of 2020 new releases of LLEAP will no longer support Windows 7

Laerdal Learning Application (LLEAP) v. 7.1.0

1 320,4 MB - Multilingual
14/09/20

Changes in this release:

• Support for custom vital signs on Patient Monitor (extended user defined variables).
• Removed Shockwave Flash.
• Removed Connectify.
• Removed EloSetup and EloInterface.
• Fixed an issue causing LLEAP downloads to be corrupted.
• Fixed an issue causing sound issues on SimBaby and SimNewB.
• SimCapture now allows to select specific regions.
• General maintenance, bugfixes and improvements.

 

Important:

• The applications that has been removed from the installer (Flash, Connectify and Elo) will not be uninstalled from existing installations.
• Use this version if you need Laerdal Scenario Cloud.
• Use this version if you are experiencing problems related to connectivity.

 

• Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location: Microsoft Visual C++ 2015 Redistributable Update 3 . Select and run vc_redist.x86 then try running LLEAP.

 

Note:

Updating to Windows 10?

• Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
  • Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.

Laerdal Patient Monitor v. 7.1.0

719,0 MB
14/09/20

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad.

Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.

 

New version to align with LLEAP 7.1.0

Changes in this release:

• Support for custom vital signs on Patient Monitor (extended user defined variables).
• Improved communication between Patient Monitor and SimPad/SimPad PLUS.

 

Note:

Updating to Windows 10?

• Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
  • Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.

Laerdal Learning Application (LLEAP) v. 6.8.1

1 225,5 MB
18/12/19

Changes in this release:

• Simulator lost connection - Improving error message.
• SimBaby - Improved trachostomy functionality to close Laryngospasm and open airways.
• SimBaby - Fixed issue with Pharyngeal obstruction not showing in Instructor Application for a virtual simulator.
• Themes - Now showing features related to available simulator.
• SimJunior - Fixed issue where simualtor did not show in simulator list.
• SimMom - Now possible to connect SimMom using Advanced option.
• LLEAP - Fixed issue related to changeing vital signs before starting session.
• LLEAP - Fixed issue related to application start.
• SimMan 3G - Fixed an issue where changes to tracheostoma opening is logged for SimMan 3G which is not supporting it.
• LLEAP - Fixed an issue where SessionViewer still shows state "Recording" if LLEAP selects to start a new session .
• Stop compression event - Fixed an issue where stopping simulated compression did not result in a "Stop compression" even.

 

Changes since 6.8.0:

• Added support for SimBaby with Tracheostomy.
• Several improvements and adjustments to UI for SimNewB.
• Added a Stopwatch function. Click on the time-field next to the Play/Pause button on the Session control window to show the Stopwatch window..
• Added a new pre-recorded vocal sound “OK” for Adult(Male/Female) and Child.
• Improved UI for Stomach distention function. Now have a separate “Release air” button. For SimJunior there is also a separate “Inflate” button.
• Fixed an issue where LLEAP would sometimes crash when ending a session.
• Fixed an issue where Tongue fallback was not working properly when running a scenario.
• Fixed an issue where transitions of User Defined Variables would not always end up on the correct value.

Laerdal Patient Monitor v. 6.8.1

673,3 MB
18/12/19

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad.

Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.

New version to align with LLEAP 6.8.1

Changes in this release:

• Defibrillator Monitor - Fixed issue with layout.
• Patient Monitor Layout - Fixed issue with hidden buttons after minimizing application.
• Metronom sound - Fixed issue where metronome sound did not start.
• ECG AV Block - Fixed issue with wrong HR on high heart rates.
• SimMom - Fixed issue where SimMom was listed twice in simulator list.

 

Changes since 6.8.0:

• Simulated AED and Defibrillator monitor (SimStart) now have translated voice prompts.
• Improved volume indicator on simulated AED/Defibrillator monitor.
• Fixed an issue where the NIBP auto measurement would be triggered too often.
• Fixed an issue where the NIBP measurement would sometimes be shown before activating the measurement.
• Fixed an issue where some buttons would not show after minimizing the Patient Monitor window.
• Fixed an issue where Patient Monitor in AED mode would sometimes crash.

SimView Downloads

24/11/17

Use this link to download latest software to SimView

SimView Mobile Downloads

24/11/17

Use this link to download latest software to SimView Mobile

Session Viewer Downloads

09/11/17

Use this link to download latest software to Session Viewer