HomeDownloadsDownloads for SimPad PLUS

Downloads for SimPad PLUS



Directions for Use

Quick Guide WiFi setup

1.2 MB - English
24/06/19

How to Update SimPad and SimPad PLUS Software

0.4 MB - Multilingual
03/11/17

This document explains how to update the software on your SimPad and Link Box, including PLUS version.
SimPad PLUS Quick Setup Guide Multilanguage

5.5 MB - Multilingual
28/06/16

Documents

Laerdal Network Requirement Document

0.6 MB - English
27/09/21

This document describes the requirements for setting up a network on pre-existing infrastructure specifically for Laerdal simulation devices. Replaces LLEAP IT & Network Information document

Software

SimPad PLUS 8.0.2


10/09/21

Changes in this release:

  • New BLS manikin firmware, 1.2.1.
  • Support for TruMonitor.
  • BLS competition (Australia).
  • Virtual CPR added.
  • Changes to Session settings, feature is moved.
  • Fix for SimPad failing to upload log file to SimView.
  • .
  • Fixes:
    • Fixes for SimPad PLUS.
    • Occasionally SimPad PLUS has lost its licenses.
    • Pacing on AVB 3 degree has not given heart rate increase.
    • When using 'Evaluate later' screen has jumped out to start page.
    • In BLS mode toggling timeline several times resulted in SimPad restarting.
    • SimView was missing log when using SimPad PLUS.
    • When charging SimPad will now turn of once it is fully charged if not in use.
    • Enabling debrief server when using Standardized Patient.

 

Changes from version 8.0.0:

  • CPR Guidelines 2020 (Changes to ventilation rates for baby and child age groups).
  • SimPad PLUS and LinkBox PLUS will not connect to old LinkBox and SimPad devices.
  • Resusci Anne QCPR firmware version 1.20 with QCPR Guideline 2020.
  • Fixes:
    • BLS instructor would sometime not connect to RAAST manikin.
    • Session logfiles on Standardized patient are not stores if user quits session

 

Note:

Compatibility with SimPad and LinkBox
  • SimPad PLUS and LinkBox PLUS 8.0.0 and newer is no longer compatible with SimPad and LinkBox.
    • Last software version for SimPad and LinkBox is 7.4.5, and not compatible with 8.0.0 for PLUS.
          Updating to Windows 10?
          • Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
            • Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.
          Windows 7
          • Patient monitor 8.0.0 and newer will not support Windows 7

           

          • Updating Nursing Anne Simulator, SimNewB and SimBaby take up to 20 minutes. Wait for a steady green light on the manikin.
          • Resusci manikins are updated with new firmware, the update takes up to 5 minutes.
SimPad PLUS 7.4.5


11/06/21

Changes in this release:

  • Session logfiles on Standardized patient are not stores if user quits session.

 

Changes from version 7.4.0:

  • Nursing Anne Simulators will have a new option in Session Information to change the default age and gender of the manikin (per now it only affects prerecorded sounds).
    • Age and Gender Setup button is only visible when connected to a Nursing Anne Simulator .
  • Voice Conferencing Application (VCA) improvements.
    • Occasional aliasing on VCA has been improved.
    • Prerecorded sounds will in some cases sound loud through the instructor headset, a button to automatically mute instructor headset when playing prerecorded sounds has been added.
  • Fix Vocal sound on SimMan ALS.
  • Fix flow fraction score for BLS Instructor.
  • Fixed issue with Nursing Anne Simulator, SimNewB and SimBaby where they would sometimes not connect after running first session.
  • Corrected problem where SimPad would sometimes not connect to internet enabled services such as Laerdal Scenario Cloud.
  • Fixed ShockLink update issue where some devices would fail to update to newest version.

 

Note:

Updating to Windows 10?
  • Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
    • Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.
Windows 7
  • Patient monitor 8.0.0 and newer will not support Windows 7

 

  • Updating Nursing Anne Simulator, SimNewB and SimBaby take up to 20 minutes. Wait for a steady green light on the manikin.
  • Resusci manikins are updated with new firmware, the update takes up to 5 minutes.
SimPad PLUS 7.3.0


25/01/21

Changes in this release:

  • Bluetooth discovery of simulators.
  • SimPad PLUS to Simulator automatic WiFi settings synchronization.
  • WPA2 Enterprise Wifi network support with username password.

 

 

Note:

Updating to Windows 10?
  • Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
    • Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.
Windows 7
  • By the end of 2020 new releases of Patient Monitor will no longer support Windows 7

 

  • Updating Nursing Anne Simulator, SimNewB and SimBaby take up to 20 minutes. Wait for a steady green light on the manikin.
  • Resusci manikins are updated with new firmware, the update takes up to 5 minutes.
SimPad PLUS 6.8.1


04/12/19

Changes in this release:

  • Bugfix Bad Voice Conferencing Audio.
  • BugFix Audio feedback using external microphone to SimJunior manikin .
  • Bugfix SimBaby artificial chestmovement while ventilating.
  • Bugfix SimStart virtual pads not registered.
  • Bugfix SimStart AED not detected on using SimPad BLS Instructor.
  • Bugfix Standarized Patient spins forever.

 

Changes since 6.8.0:

  • SimPad :
    • SimPad Manual Mode: Shock did not set to the next heart rhythm.
    • Licenses: Possible to remove SimPad licenses.
    • SimPad Classic: Not able to access SimStore on Wifi.
  • Nursing Anne Simulator:
    • Voice conferencing system higher default volume
    • More silent running chest rise
  • SimBaby:
    • Possible for the instructor to trigger intubation event in Manual Mode
    • Added Gallop heart sound when using SimPad
    • Tracheostomy Care: Fixed airway leakage when ventilating while intubated
    • Movement and seizures should halt when session is paused
    • Release button for stomach distension
    • Fixed etCO2 curve on Patient Monitor when ventilating
    • no lung sounds when ventilating
  • SimNewB:
    • Release button for stomach distension
    • SimBaby: Possible for the instructor to trigger intubation event in Manual Mode
  • Other:
    • RA QCPR: Updated Firmware
    • Resuci Junior QCPR: Updated Firmware
    • SimJunior: Release button for stomach distension
    • Sounds Trainer: Possible to adjust sound volume levels

Note:

  • Updating Nursing Anne Simulator, SimNewB and SimBaby take up to 20 minutes. Wait for a steady green light on the manikin.
  • Resusci manikins are updated with new firmware, the update takes up to 5 minutes.
SimView Downloads


24/11/17

Use this link to download latest software to SimView
SimView Mobile Downloads


24/11/17

Use this link to download latest software to SimView Mobile
Session Viewer Downloads


09/11/17

Use this link to download latest software to Session Viewer
SimPad Theme Editor

- English
05/01/16

IMPORTANT INFORMATION - This software will only be accessible using Internet Explorer

The Theme Editor is an online PC software tool for creating Themes for the SimPad system when operated using the Manual Mode. The program allows you to easily make new Themes with States and Interventions.

For offline use: Right click anywere in the web page and select Install SimPad Theme Editor onto this computer...


© 2001-2021 Laerdal Medical. All Rights Reserved.