HomepageDownloadsDownloads for LLEAP - Laerdal Learning Application

Downloads for LLEAP - Laerdal Learning Application



DFU

SimStart User Guide

3.4 MB - English
10/01/2020

Simulated AED or Monitor Defibrillator training functionality available in Laerdal Learning Application- LLEAP
Quick Guide WiFi setup

1.2 MB - English
24/06/2019

Session Viewer - User Guide

2.7 MB - Multilingual
10/07/2015

Documents

Laerdal Network Requirement Document Rev M

0.7 MB - English
23/02/2022

This document describes the requirements for setting up a network on pre-existing infrastructure specifically for Laerdal simulation devices.

Software

Laerdal Learning Application (LLEAP) v. 8.2.0

1 500.1 MB
30/03/2022

Changes in this release:

  • EFM improvments.
    • The appearance of Fetal Heart Rate and TOCO curves have been improved to resemble real data more accurately.
    • The visibility of the time scale has been improved.
    • The visibility of the values on the scale of EFM & TOCO have been improved.
    • The paper speed can be changed by clicking the paper speed value on the EFM screen, which then toggles the view between 1cm/min, 2cm/min & 3cm/min speeds.
    • A colored background has been added to the FHR, indicating different alert levels for the heart rate values. The levels can be set by the users in the profile editor and will carry through all scenarios.
  • LLEAP.
    • Security improvements .
    • Fixes an issue where SimCapture recording was not automatically stopped when shutting down LLEAP and the simulator .
    • Fixes an issue when using themes where aortic value was not set correctly on first load of theme.
  • SimMan 3G family.
    • Fixes an issue where eye blinking would be off at start up for SimMan Essential.
    • Fixes an issue where pacing a SimMan 3G did not affect the pulse.
    • Fixes an issue where some SimMan 3G simulators were going into a continuous loop.
  • Patient Monitor.
    • Fix for an error where alarms were not always turned off when value was back within acceptable range as set in profile editor.
    • Fix for an error where patient monitor would crash on startup if language was set to Dutch.
  • SimDesigner.
    • Functionality to automatically save changes on SimDesigner close added .
    • Fixes an issue, where it was not possible to set a delay on rhythm changes.
    • Fixes an issue, where events sometimes could not be moved around in phase editor.
    • Fixes for GUI and translation issues.
Laerdal Patient Monitor v. 8.2.0

896.1 MB
30/03/2022

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad.

Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.

Changes in this release:

  • New version to align with LLEAP 8.2.0
  • Fix for an error where alarms were not always turned off when value was back within acceptable range as set in profile editor.
  • Fix for an error where patient monitor would crash on startup if language was set to Dutch.
Laerdal Learning Application (LLEAP) v. 8.1.0

1 489.9 MB
07/01/2022

Important:

 

Version 8.1.0 of LLEAP contains the following:

  • Bug fixes:
    • SimMan 3G PLUS is now available in the selection of virtual simulators.
    • CPR Guidelines have been updated to adhere to latest guidelines from the European Resuscitation Council (ERC 2021) and American Heart Association (AHA 2020.
    • Improvements on how well the Instructor Application GUI scales on computers with display scaling other than 100% (the recommended setting is still scaling at 100%).
    • Fix for Patient Monitor and CO2 when usingSimPad.
    • Fix for missing pulse control when using SimMom.
    • Added static IP address on SimMan 3G.
    • Fix for SimMan 3G PLUS PB changes and missing respons in right arm brachial pulse.
    • Fix for unaccesible control buttons on computers with low resolution.

     

Changes from version 8.0.0:

  • Support for SimMan 3G PLUS.
  • New updater for SimMan 3G simulators, providing a more reliable update experience, and improved progress feedback.
  • Support for Nursing Anne Geriatric, allowing Nursing Anne Simulators that are using the new geriatric skin to use geriatric vocal sounds.
  • Link Box Classic is no longer supported.
  • LLEAP on Windows 7 computers is no longer supported.
  • SimMan 3G simulators using Windows XP Embedded is no longer supported.
  • New version of SimDesigner:
    • Dependency on Microsoft Silverlight removed, so that SimDesigner can be used without Silverlight installed.
    • Minor changes to user interface when editing states to make it easier to add many states.
    • Missing icons for some heart rhythms added.
    • Option to use “external windows” has been removed.
  • Bug fixes:
    • Fixes a bug introduced in LLEAP 8.0.0 where video recording was not included in the debrief when using SessionViewer and SimView.
    • Fixes an issue where the driver for the wifi adapter used with SimMan 3G was missing when installing LLEAP.

 

Note:

Updating to Windows 10?
  • Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
    • Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 on, the equipment will need to use a separate simulation network. Laerdal can help you connect all your simulation equipment to a dedicated network. Learn more and get started at Laerdal.com/Network.

Windows Update
  • Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location: Microsoft Visual C++ 2015 Redistributable Update 3. . Select and run vc_redist.x86 then try running LLEAP.
Laerdal Patient Monitor v. 8.1.0

895.6 MB
07/01/2022

Important:

 

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad.

Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.

 

Changes in this release:

  • New version to align with LLEAP 8.1.0

 

Note:

Updating to Windows 10?
  • Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
    • Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.
Windows 7
  • Laerdal Patient Monitor 7.3 is the last version that supports Windows 7
LLEAP Patch for 7.3.0

0.4 MB - English
28/07/2021

LLEAP Patch for 7.3.0, for older SimMAn 3G who can't use LLEAP 8.0

 

This update is supplied to fix an issue where chest rise and lung sounds ceases on the SimMan 3G when used with ASL 5000 using a ventilator setting of PEEP 2 cm H2O or greater. The issue can also be resolved by upgrading to LLEAP 8.0.0. This patch should only be used if upgrade to 8.0.0 is not possible, e.g if using older SimMan 3G with XP embedded which is not supported on LLEAP 8.0.0 and onwards.

Important: ASL 5000 plugin needs to be uninstalled before patch installation and reinstalled afterwards. Remember to back up custom lung models when prompted during uninstall process and import again during install process after upgrade to patch.

Note:

    SimMan 3G updater might need several tries before the patch is installed on simulator
Laerdal Learning Application (LLEAP) v. 7.3.0

1 526.9 MB
16/03/2021

Important:

 

Changes in this release:

  • New Device Connection Manager (DCM) application to manage network configurations more efficiently on multiple manikins.
  • Enhanced support for Enterprise Network Security from SFNW & for SimMan3G with Wifi USB adapter.
  • Fixed an issue where SimMan3G system time was not synced.
  • Improved simulator connection on networks with high latency.
  • Included WiFi driver to LLEAP installer (for SOM on SimMan3G).
  • Fixed an issue where the simulation wouldn't use the wanted simulation profile unless explicitly selected. Could lead to using wrong units and similar problems.
  • LLEAP supports transport layer security (TLS) 1.2 or greater for login to Scenario Cloud.
  • Fixed an issue causing help files not to work.

 

Note:

Updating to Windows 10?
  • Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
    • Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 on, the equipment will need to use a separate simulation network. Laerdal can help you connect all your simulation equipment to a dedicated network. Learn more and get started at Laerdal.com/Network.

Last LLEAP version supporting Windows 7
  • LLEAP 7.3 will be the last version that supports Windows 7.

Last version supporting old SimMan 3G family simulators

Due to end of life for Windows XP Embedded used on older SimMan3G simulators, LLEAP will no longer supported as of this version, this applies to the following simulators - unless they have been upgraded to use Windows 7:

  • SimMan3G simulators with serial numbers lower than 212-16140000
  • SimMan3G Essential simulators with serial numbers lower than 213-16140000
  • SimMan3G Essential Bleeding simulators with serial numbers lower than 214-1614000

Windows Update
  • Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location: Microsoft Visual C++ 2015 Redistributable Update 3. . Select and run vc_redist.x86 then try running LLEAP.
Laerdal PatientMonitor v. 7.3.0

932.6 MB
11/03/2021

Important:

 

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad.

Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.

 

Changes in this release:

  • New version to align with LLEAP 7.3.0
  • General maintenance, bugfixes and improvements.

 

Note:

Updating to Windows 10?
  • Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
    • Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.
Windows 7
  • Laerdal Patient Monitor 7.3 will be the last version that supports Windows 7
Laerdal Learning Application (LLEAP) v. 6.8.1

1 225.5 MB
18/12/2019

Changes in this release:

  • Simulator lost connection - Improving error message.
  • SimBaby - Improved trachostomy functionality to close Laryngospasm and open airways.
  • SimBaby - Fixed issue with Pharyngeal obstruction not showing in Instructor Application for a virtual simulator.
  • Themes - Now showing features related to available simulator.
  • SimJunior - Fixed issue where simualtor did not show in simulator list.
  • SimMom - Now possible to connect SimMom using Advanced option.
  • LLEAP - Fixed issue related to changeing vital signs before starting session.
  • LLEAP - Fixed issue related to application start.
  • SimMan 3G - Fixed an issue where changes to tracheostoma opening is logged for SimMan 3G which is not supporting it.
  • LLEAP - Fixed an issue where SessionViewer still shows state "Recording" if LLEAP selects to start a new session .
  • Stop compression event - Fixed an issue where stopping simulated compression did not result in a "Stop compression" even.

 

Changes since 6.8.0:

  • Added support for SimBaby with Tracheostomy.
  • Several improvements and adjustments to UI for SimNewB.
  • Added a Stopwatch function. Click on the time-field next to the Play/Pause button on the Session control window to show the Stopwatch window..
  • Added a new pre-recorded vocal sound “OK” for Adult(Male/Female) and Child.
  • Improved UI for Stomach distention function. Now have a separate “Release air” button. For SimJunior there is also a separate “Inflate” button.
  • Fixed an issue where LLEAP would sometimes crash when ending a session.
  • Fixed an issue where Tongue fallback was not working properly when running a scenario.
  • Fixed an issue where transitions of User Defined Variables would not always end up on the correct value.
Laerdal Patient Monitor v. 6.8.1

673.3 MB
18/12/2019

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad.

Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.

New version to align with LLEAP 6.8.1

Changes in this release:

  • Defibrillator Monitor - Fixed issue with layout.
  • Patient Monitor Layout - Fixed issue with hidden buttons after minimizing application.
  • Metronom sound - Fixed issue where metronome sound did not start.
  • ECG AV Block - Fixed issue with wrong HR on high heart rates.
  • SimMom - Fixed issue where SimMom was listed twice in simulator list.

 

Changes since 6.8.0:

  • Simulated AED and Defibrillator monitor (SimStart) now have translated voice prompts.
  • Improved volume indicator on simulated AED/Defibrillator monitor.
  • Fixed an issue where the NIBP auto measurement would be triggered too often.
  • Fixed an issue where the NIBP measurement would sometimes be shown before activating the measurement.
  • Fixed an issue where some buttons would not show after minimizing the Patient Monitor window.
  • Fixed an issue where Patient Monitor in AED mode would sometimes crash.
SimView Downloads


24/11/2017

Use this link to download latest software to SimView
SimView Mobile Downloads


24/11/2017

Use this link to download latest software to SimView Mobile
Session Viewer Downloads


09/11/2017

Use this link to download latest software to Session Viewer

Datenschutzhinweis und Impressum. Copyright 2001-2022, Laerdal Medical. Alle Rechte vorbehalten.