Näyttää ja toimii kuin HeartStart FR3
AED Trainer 3 heijastaa Philips HeartStart FR3 AED ainutlaatuisen toimivuuden ja tarjoaa oikeanlaisen harjoitus kokemuksen.
Joustava konfigurointi
AED Trainer 3 on määritelty 8 erillaisella skenaariolla, kaikki ovat AHA ja 2010 elvytysohjeiden mukaiset. Jokaisen skenaarion parametrit ovat muutettavissa paikallisen protokollan tai uusien elvytysohjeiden mukaan. Myös puheen kieli on helposti vaihdettavissa napin painalluksella.
Kouluttajan ohjaus
Kouluttaja voi vaihtaa skenaarioita painamalla laitteessa olevaa nappia tai käyttmällä kaukosäädintä. Jokaisen skenaarion aikana kaukosäätimellä voi pysäyttää, vaihtaa tai aloittaa uusia haasteita, kokeillaakseen miten erillaisiin tilanteisiin reagoidaan.
AED Trainer 3 Technical Specifications
Below you will find the most important Technical Specifications for the AED Trainer 3. Most of the specifications you will also find in the Directions for Use (DfU).
PHYSICAL
|
|
Weight |
600g (1.3lbs) |
Size HxWxD |
218 mm x 133 mm x 57 mm (8.6” x 5.2” x 2.2” ) |
Ruggedness |
- 10cm drop without operation interruption
- 1 meter drop test retaining full functionality
- No IP classification
|
OPERATION
|
|
Operating System |
On Data Card - 1 GB SD.
Data card also contains configuration software (multi language) required to change device parameters.
Localisation and software updates available from Laerdal download site.
|
BATTERY
|
|
Type |
4 x AA Alkaline (any brand) |
Capacity |
>10 hours |
MATERIALS
|
(materials Prop 65 compliant) |
Housing |
Acrylonitrile butadiene styrene (ABS) |
Control buttons |
Silicone |
Foot |
Polyurethane (PU) |
Infant/Child key |
Polycarbonate and polybutylene terephthalate (PC + PBT) |
Tether |
Silicone |
EMC CLASSIFICATION
|
|
|
The product is in compliance with the essential requirements of Directive 2004/108/EC on electromagnetic compatibility through compliance with:
• IEC 61000-6-3 Electromagnetic Compatibility (EMC) - Part 6-3:
• IEC 61000-6-1 Electromagnetic Compatibility (EMC) - Part 6-1:
(See DFU for additional electromagnetic conformity information)
|
REGULATORY APPROVALS
|
|
|
CE mark, FCC Statement (US), CSA Certification (Canada), C Tick (N25270) (Australia)
|
ENVIRONMENTAL CONDITIONS
|
|
Storage temperature |
0º - 40º C (32º - 104º F) |
Operating temperature |
10º - 35º C (50º - 95º F) |
Relative humidity |
0 - 90% non-condensing |
Remote Control
|
|
Size |
96 mm x 54 mm x 6 mm (3.8” x 2.1” x 0.2”) |
Battery Type |
Lithium CR2025 3V |
DISPOSAL
|
|
AED Trainer 3 |
Contains electronic components which should be disposed of in accordance with local regulations. |
WARRANTY
|
|
|
One Year limited. Please see Laerdal Global Warranty for terms and conditions. |
SERVICE
|
|
|
Out of warranty repair carried out by Laerdal Tech Centres |
|
|