Skip to content

LLEAP - software de simulación

Planifique, ejecute y evalúe su formación mediante simulación

Consiga el control completo de su formación mediante simulación con Laerdal Learning Application - LLEAP. 

Go to section

Sencillez y control

Una única e intuitiva interfaz para todos los simuladores de Laerdal

Desde el principio hasta el final, LLEAP mejora y facilita una planificación y enseñanza fiable, así como mejores resultados de la formación para los alumnos.

LLEAP unifica el funcionamiento de todos los simuladores de Laerdal controlados mediante PC ofreciendo una interfaz de usuario común, opciones de hardware intercambiables y una experiencia de simulación cohesiva. Tendrá el control total para planificar, ejecutar y evaluar las sesiones de simulación. 

Esta potente plataforma le ayuda a crear experiencias formativas que cumplan sus objetivos de aprendizaje para participantes de todos los niveles.

  • Elija su solución LLEAP
  • Monitorización del paciente
  • Tutoriales en vídeo
  • Servicio de implementación
  • Servicios educativos
  • ¿LLEAP o SimPad?

Elija su solución LLEAP

3 LICENCIAS DE LLEAP: 

LLEAP Standard
Una licencia LLEAP completa unifica el control de todos los simuladores de Laerdal controlados con PC y facilita la ejecución de la formación mediante simulación.

LLEAP Fundamentals
LLEAP Fundamentals le permite llevar a cabo la formación con equipos para técnicas y pacientes estandarizados utilizando un monitor de paciente simulado.

LLEAP Lite
LLEAP Lite se puede descargar gratuitamente y le permite practicar con LLEAP. Pruebe sus escenarios desde la comodidad de su propio PC.

Monitorización del paciente

Monitorización del paciente con LLEAP

Lleve la simulación a un nuevo nivel con la monitorización realista del paciente

La plataforma LLEAP incluye un software de monitorización simulada.

Ofrezca a los alumnos una experiencia inmersiva y realista permitiéndoles practicar en un simulador, así como con un monitor de paciente. Mejora el realismo clínico e incentiva las habilidades de pensamiento crítico de todos los estudiantes. También puede añadir informes de laboratorio, rayos X y multimedia para mejorar aún más la simulación.

Parámetros simulados
Las capacidades de monitorización del paciente de LLEAP proporcionan indicaciones clínicas concisas sobre los parámetros del paciente, que incluyen:

  • ECG
  • SpO2
  • CO2
  • PA
  • PVC
  • PAP
  • PANI
  • TOF
  • ..y muchos otros.

Tutoriales en vídeo

Tutoriales en vídeo

Vea nuestros tutoriales en vídeo para que le ayuden a comenzar.

Vídeos de procedimientos de LLEAP

Servicio de implementación

Servicio de implementación

Para ayudarnos a determinar si LLEAP es compatible con su entorno de simulación, rellene el cuestionario de implementación de LLEAP y envíelo a LLEAPtechsupport@laerdal.com.

Podremos proporcionarle un presupuesto con todo el hardware que pueda necesitar y un técnico de asistencia de Laerdal acudirá a su centro para ayudarle a implementar LLEAP.

Descargue y rellene el cuestionario

¿Sigue utilizando nuestro software Instructor Application? 
Todos los clientes que todavía utilicen nuestro software Instructor Application deberán cambiar los simuladores de Laerdal existentes a la plataforma LLEAP. Siga el mismo procedimiento antes indicado. 

Servicios educativos

Servicios educativos

Ofrezca a sus instructores los conocimientos y datos sobre cómo utilizar óptimamente los productos de Laerdal y facilite que entrenen, motiven y enseñen a los estudiantes procedimientos vitales para salvar vidas.

Elija entre una gama de servicios y cursos, desde el curso de iniciación y enseñanza con LLEAP, ayuda para crear escenarios, hasta cursos de repaso para afianzar lo aprendido. 

Servicios educativos de Laerdal

¿LLEAP o SimPad?

¿LLEAP en PC o LLEAP para SimPad? 

La mayoría de los simuladores de Laerdal pueden controlarse de dos maneras. Según sus necesidades, puede elegir entre ejecutar LLEAP en un PC o en un SimPad PLUS.

LLEAP en PC
  • Puede instalar LLEAP en un portátil, tableta, tableta reforzada o PC todo en uno para controlar su simulador.
  • El control mediante PC resulta ideal para su uso en una sala de control con varias salas de formación, sistemas de cámaras y otras funciones que utilizan los centros de simulación. 
  • El control mediante PC ofrece funciones más avanzadas que las de SimPad PLUS, entre las que se incluyen parámetros adicionales en el monitor del paciente, rayos X, integración multimedia, vista ampliada y personalizada de la interfaz del usuario y mucho más. 
  • Con un PC, tendrá la posibilidad de integrar soluciones de otros fabricantes, como las soluciones de ecografía SonoSim y la monitorización del paciente VitalsBridge. 
LLEAP para SimPad PLUS
  • Esta es una versión independiente del software LLEAP. Puede utilizarla para manejar todos los maniquíes y simuladores controlados mediante SimPad PLUS. 
  • SimPad PLUS proporciona una experiencia directa y sin complicaciones al usuario.
  • Es portátil y resulta ideal para la formación en cualquier lugar.

Más información sobre SimPad PLUS

Descripción general

Descargas de productos

Guías del usuario

pdf

SimStart User Guide (3mb)

Simulated AED or Monitor Defibrillator training functionality available in Laerdal Learning Application- LLEAP

Información importante

pdf

Laerdal Network Requirement Document

This document describes the requirements for setting up a network on pre-existing infrastructure specifically for Laerdal simulation devices. Replaces LLEAP IT & Network Information document

pdf

LLEAP IT Network Information

LLEAP, SimPad, simulators need a network to communicate on. Laerdal uses different features in order to detect and run simulations. Information about network requirement is found here.

pdf

Laerdal Network Requirement Document

This document describes the requirements for setting up a network on pre-existing infrastructure specifically for Laerdal simulation devices. Replaces LLEAP IT & Network Information document

pdf

Laerdal Network Requirement Document

This document describes the requirements for setting up a network on pre-existing infrastructure specifically for Laerdal simulation devices. Replaces LLEAP IT & Network Information document

pdf

Laerdal Network Requirement Document

This document describes the requirements for setting up a network on pre-existing infrastructure specifically for Laerdal simulation devices. Replaces LLEAP IT & Network Information document

Software

Laerdal Learning Application (LLEAP) software download 6.1.0.2613

LLEAP software unifies the control of all PC operated Laerdal simulators and brings simplicity to running simulation training. Click the software link above to trial the software and learn about how you can start using LLEAP with your existing PC operated simulator. The LLEAP software download includes the Laerdal Patient Monitor and SimDesigner software.

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [NO]

LLEAP-programvare samler kontrollen til alle pc-drevne Laerdal-simulatorer og bringer enkelhet til løpende simuleringstrening. Eier du allerede en PC-drevet Laerdal-simulator? Last ned online og se om du kvalifiserer for en LLEAP-lisens.

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [BR]

O software LLEAP unifica o controle de todos os simuladores operados por PC da Laerdal e traz simplicidade ao treinamento de simulação. Já possui um PC operando o simulador Laerdal? Baixe online e veja se você é elegível para uma licença gratuita do LLEAP.

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [ZH]

LLEAP 软件可以对所有 PC 操作的 Laerdal 模拟器的控制进行统一。 已經擁有 PC 操作的 Laerdal 模擬器? 線上下載並看看您是否符合免費獲得 LLEAP 授權的資格。

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [DK]

LLEAP-software samler kontrollen med alle PC-drevne Laerdal-simulatorer og gør det nemt at køre simulationsbaseret træning. Ejer du allerede en PC-styret Laerdal-simulator? Klik på linket og lær mere om, hvorledes du kan bruge LLEAP sammen med din Laerdal simulator.

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [NL]

LLEAP-software verenigt de controle van alle PC-bestuurde simulatoren van Laerdal en vereenvoudigt het uitvoeren van een simulatietraining. Hebt u al een Laerdal simulator die via de pc wordt bediend? Download online en kijk of u in aanmerking komt voor een gratis LLEAP-licentie.

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [BE-NL]

LLEAP-software verenigt de controle van alle PC-bestuurde simulatoren van Laerdal en vereenvoudigt het uitvoeren van een simulatietraining. Hebt u al een Laerdal simulator die via de pc wordt bediend? Download online en kijk of u in aanmerking komt voor een gratis LLEAP-licentie.

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [FI]

LLEAP-ohjelmisto yhtenäistää kaikkien PC:llä käytettävien Laerdal-simulaattoreiden ohjaamista ja tekee simulaatiokoulutuksesta yksinkertaista. Joko sinulla on tietokoneella ohjattava Laerdal-simulaattori? Lataa se verkosta, niin näet, saatko LLEAP-lisenssin.

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [FR]

Le logiciel LLEAP permet le contrôle simultané de tous les simulateurs Laerdal fonctionnant sur PC et apporte simplicité à l'exécution de la formation par simulation. Vous possédez déjà un simulateur Laerdal fonctionnant sur PC ? Téléchargez en ligne et voyez si vous pouvez pouvez télécharger une licence LLEAP.

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [BE-FR]

Le logiciel LLEAP permet le contrôle simultané de tous les simulateurs Laerdal fonctionnant sur PC et apporte simplicité à l'exécution de la formation par simulation. Vous possédez déjà un simulateur Laerdal fonctionnant sur PC ? Téléchargez en ligne et voyez si vous pouvez télécharger une licence LLEAP.

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [DE]

Die LLEAP-Software vereinheitlicht die Steuerung aller PC-betriebenen Laerdal-Simulatoren und ermöglicht so ein unkompliziertes Simulationstraining. Besitzen Sie bereits einen PC-gesteuerten Laerdal-Simulator?  

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [AT]

Die LLEAP-Software vereinheitlicht die Steuerung aller PC-betriebenen Laerdal-Simulatoren und ermöglicht so ein unkompliziertes Simulationstraining. Besitzen Sie bereits einen PC-gesteuerten Laerdal-Simulator? Laden Sie es online herunter und überprüfen Sie, ob Sie Anspruch auf eine kostenlose LLEAP-Lizenz haben.

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [IT]

Il software LLEAP unifica il controllo di tutti i simulatori Laerdal gestiti da PC e porta semplicità nell'esecuzione della formazione in simulazione. Siete già in possesso di un simulatore Laerdal gestito da PC? Eseguite il download online e guardate se avete diritto a una licenza di LLEAP.

LLEAP - レールダル学習アプリケーション v.6.1.0.2613 [JP]

LLEAP のソフトウェアは全ての PCでオペレートされるLaerdalシミュレーターの制御を統合し、シミュレーション トレーニングをシンプルにします。 すでにPC操作式レールダルシミュレータをお持ちですか? オンラインでダウンロードし、無料のLLEAPライセンスの対象 であるかどうかをご確認ください。

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [KR]

LLEAP 소프트웨어는 래어달 시뮬레이터를운영하는 모든 PC를 통합하고 시뮬레이션 훈련 운영을 간소화 합니다. 래어달 시뮬레이터가 실행중인 컴퓨터를 이미 갖고 계신가요? 온라인에서 다운로드하고 무료 LLEAP 라이센스를  받을 수 있는지 확인하세요.

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [ES]

El software LLEAP unifica el control de todos los simuladores Laerdal controlados por PC y simplifica la realización del entrenamiento de simulación. ¿Ya tiene un simulador de Laerdal gestionado con un PC? Descárguelo en línea y compruebe si es apto para una licencia de LLEAP.

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [LA]

El software LLEAP unifica el control de todos los simuladores Laerdal controlados por PC y simplifica la realización del entrenamiento de simulación. ¿Ya tiene un simulador de Laerdal gestionado con un PC? Descárguelo en línea y compruebe si es apto para una licencia gratuita de LLEAP.

Laerdal Learning Application (LLEAP) v.6.1.0.2613 [SE]

LLEAP-programvaran förenar kontrollen av alla Laerdals PC-styrda simulatorer och gör det enkelt att göra simulationsövningar. Äger du redan en PC-driven Laerdal-simulator? Ladda ner online och se om du är berättigad till en gratis LLEAP-licens.

exe

LLEAP_5.3_VCA_Patch (93mb)

This patch is fixing an issue occurring on some systems after upgrading from legacy Instructor Application to LLEAP, where speech and vocal sounds are played back with severe artefacts. The sound will typically be either very high pitched and fast or very low pitched and slow. Also, you may not be able to turn off the 3G/Essential simulator by pressing the power button. If your system has this problem it may affect both 3G/Essential family simulators as well as simulators connected via the SimPad Link Box when using VCA for speech and vocal sounds. Please note that after installing this update, you also have to update the SimMan3G/Essential simulator firmware. This issue does not affect SimMan/SimBaby or the SimPad LinkBox software. We also recommend installing this patch if you have problems installing LLEAP 5.3 on a SimMan3G/Essential simulator. First install this patch and then try updating the simulator again.

exe

LLEAP_5.4_Win10_Patch (1mb)

This patch is fixing an issue in LLEAP and Patient Monitor 5.4 when upgrading a PC running Windows 7 or Windows 8 to Windows 10, where the license may not be accepted. If this happens you are presented with this error message: "No valid hardware ID found." when starting LLEAP or Patient Monitor. Run this patch to prevent or fix the problem.

exe

LLEAP Patch 5.4 (105mb)

Release notes: This LLEAP patch resolves issues with communication between LLEAP 5.4 and SimView Server 5.2.5799.  Please install this patch on all of your LLEAP instructor PC’s regardless of whether you utilize SimView server for your AV Capture and debriefing.

exe

SessionViewer Software – Version 6.0.6130 (137mb)

SessionViewer is a standalone application for recording, viewing and editing exported SimView debriefing files, SimPad log files and BLS result files. If you add a license to SessionViewer, you can also record the activities during a Standardized Patient Recording or Laerdal manikin scenarios controlled by Instructor Applications. When a USB-camera and a microphone and/or a Patient Monitor is added to the PC, can you record both video and audio to support the debriefing of the scenario with the students after the training session. Release Notes: Added the ability to hide the debriefing log during playback of a ssx file Minor user interface upgrades Fixed a bug that displayed an error if an unknown attribute was transferred from a Instructor Client. Fixed a bug that would allow the installer to install two instances of the software on the same machine. Update instructions:  If the PC is a LLEAP Instructor or Patient vitals PC and is connected to the internet, SessionViewer can be updated, along with LLEAP and other software, through the LLEAP Simulation Home screen update tile. To manually install or update: 1. Download the installer and move to the PC with SessionViewer installed. 2. Locate and double-click the installer to open the installer. 3. Follow the prompts, as the installer will take you through the necessary steps. 4. When the installer completes, you may be prompted to restart the system – please do so. 5. SessionViewer will be ready to use once the installer has completed. Licensing and Equipment from your existing configuration will carry over to the new version upon upgrade.

exe

Laerdal Learning Application (LLEAP) software download 6.1.0.2613 (1526mb)

LLEAP software unifies the control of all PC operated Laerdal simulators and brings simplicity to running simulation training.  Existing LLEAP users can update their software to version 6.1.0.2613 which comes with: Windows 10 compatibility Introduction of Themes and States New sound recorder software allows recordings to be compatible for both LLEAP and SimPad Right main stem intubation detection indicator Plus other improvements and fixes   The LLEAP software download includes the Laerdal Patient Monitor and SimDesigner software. Don’t have LLEAP? Click here if you would like to trial the software and learn about how you can start using LLEAP with your existing PC operated simulator.

exe

Laerdal Simulation Home (LLEAP) v. 6.2.1.3021 (50mb)

The new Laerdal Simulation Home improves the ability to use SimLink or Ad-Hoc networks. This is temporarily until a replacement for Ad-Hoc is ready. The application detects that user wants to connect to a SimLink network, checks if the existing driver supports this. If the existing driver does not support Ad-Hoc then the application will ask the user for the permission to downgrade the driver to support this. Known Issue: Some systems will get Windows Bluescreen. If this happens, we instead recommend to either: 1. Connect to Your company's Wireless network, preferably configured as a VLAN. 2. Set up a dedicated Wireless simulation networ using a wrirelss Access point / router. Remember: This is only Laerdal Simulation Home page, if you don't have LLEAP already installed you also need Laerdal Learning Application v. 6.2.0.

exe

Laerdal Learning Application (LLEAP) v. 6.2.0.2856 (1584mb)

IMPORTANT: Before installing LLEAP 6.2, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run the Visual C++ 2015 redistributable from this location: https://www.microsoft.com/en-us/download/details.aspx?id=53840 Select and run vc_redist.x86 then try running LLEAP. LLEAP 6.2 requires SimView Server Version 6.0.6116 or later We recommend you download and install the latest version from here: http://www.laerdal.com/SimView# Note that all computers in your simulator environment should use the same version of the LLEAP SW. Use the Simulator Firmware & Network Wizard to update your simulator after LLEAP has been updated. See help file for details. MAIN CHANGES: Added ventilation animations similar to what we had in the legacy applications. Assisted ventilations are now shown on the simulator avatar together with any spontanous ventilations. Added ability to show "EFM only" on a separate instance of Patient Monitor. Remember: There is an update to Laerdal Simulation Home in addition

exe

Laerdal Learning Application (LLEAP) v. 6.3.0 (1636mb)

IMPORTANT: Before installing LLEAP 6.3, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run the Visual C++ 2015 redistributable from this location: Link . Select and run vc_redist.x86 then try running LLEAP. If using SimView with LLEAP 6.3 then SimView Server Version 6.1.6339 or later is required. We recommend you download and install the latest version from here Note that all computers in your simulator environment should use the same version of the LLEAP SW. Use the Simulator Firmware & Network Wizard to update your simulator after LLEAP has been updated. See help file for details. MAIN CHANGES: Improved support for Hosted network in Windows 10. This means the LLEAP PC can act as a wireless access point, running a network for a single simulator. One simulator, one Patient Monitor and one Instructor Application or SimPad can be connected to this network. Improved support for having multiple LLEAP Instructor applications connected to the same simulation session, for supporting multiple instructor roles. Added ability to show custom input dialogs when running a scenario utilizing this ability. Added possibility to have multiple SimMom deliveries in the same session. Added custom deceleration type for SimMom EFM. Now possible to control the appearance of decelerations in detail. Added auscultation focus for SimMom. Requires that Link Box is updated to the version that comes with LLEAP 6.3. Added ability to set custom drug names for RFID tags also available when running scenarios. See drug tab in profile editor. LLEAP avatar will now indicate if the airflow is blocked (e.g. when tongue fallback is activated). LLEAP now showing a more smooth animation of the compression rate "speedometer". Added ability to collect LLEAP log files by right clicking on the Help tile in Laerdal Simulation Home.

exe

Laerdal Patient Monitor patch 6.3.0 Build 3141 (2mb)

This patch fixes an issue where a Patient Monitor running on an ELO touch screen doesn't register touch input when selecting radiology/media/labs files to present on the monitor. The patch is only required if you use an ELO touch screen connected as a Patient Monitor screen. IMPORTANT: This patch requires that LLEAP 6.3.0 is installed. If you only have Patient Monitor installed and need this patch, please either install LLEAP first and then the patch, or contact customer support to resolve the issue.

exe

Laerdal Simulation Home patch ver.6.3.1 (66mb)

This patch fixes an issue on some PCs where users of SimLink ad-hoc connections have problems connecting. IMPORTANT: Using SimLink is not recommended and this fix will not solve all connection issues with SimLink. Instead of using SimLink, Laerdal recommends that you whenever possible connect your devices in one of these ways, in prioritized order: 1. Connect to your company's wireless network, preferably configured as a VLAN. 2. Set up and connect to a dedicated wireless simulation network using a wireless access point/router. 3. Use Laerdal Network Selector to create a Hosted network.

Session Viewer Downloads

Use this link to download latest software to Session Viewer

SimView Downloads

Use this link to download latest software to SimView

SimView Mobile Downloads

Use this link to download latest software to SimView Mobile

exe

Laerdal Learning Application (LLEAP) - patch 6.3.2 (131mb)

This patch resolves the below issues: When performing synchronization to SimStore some are experiencing problems with content not releasing from LLEAP. The message "Please wait for background task to finish" is resolved. Physiological patient cases that leads to cardiac arrest fails to stop breathing. Patient Monitor 6.3.0 has been failing to reconnect if the connection to Link Box has been lost. The patch also include changes to SimMan 3G family simulators, remember to update Simulator.

exe

Laerdal Learning Application (LLEAP) v. 6.4.0 (1556mb)

Main changes: LLEAP now supports the new "Nursing Anne Simulator" Added new ECG rhythm "Sinus 60 years" that represents a healthy 60-year-old patient. Changed default level for ST elevation in Sinus AMI rhythms. Changed default severity of Hyperkalemia rhythm. The "Theme" dropdown menu in LLEAP now allows selecting among all themes in the Themes folder. Added ability in profile editor to set the timeout before LLEAP session is automatically paused. Improved reporting of "examining eyes" on SimMan 3G in bright sunlight. Now possible to disable Wi-Fi on all simulator types Improved usability of "Simulator Firmware & Network Wizard" making it simpler to update simulators and configure their network settings. Fixed an issue where the SimMom EFM patterns- "Early decels" and "Variable decels" were crossed. Also, the "Synced decels" pattern would not generate the correct response to contractions if used in a user defined preset/pattern. Fixed an issue where VCA would not work correctly if the SimMan3G computer name was longer than 15 characters. Fixed an issue with connecting to a simulator if the simulator name contained the characters '.', ';' or '='. General maintenance, bugfixes, and improvements.

exe

Laerdal Patient Monitor v. 6.4.0 (1033mb)

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer. Main changes: Reduced variance of the BP numeric values on the Patient Monitor. Fixed an issue with partial clipping of 12-lead ECG on Patient Monitor. Fixed an issue where the fetal heart sound was played in post delivery. Fixed an issue where HR would be shown as “?” when the measured heart rate is very low (e.g. in asystole). Fixed an issue where PM sometimes shows as a black screen when starting a new session. Fixed an issue where PM is not always shown on top after debriefing and starting a new session. General maintenance, bugfixes, and improvements.

exe

Laerdal Patient Monitor v. 6.4.1 (1033mb)

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer. Main changes: Reduced variance of the BP numeric values on the Patient Monitor. Fixed an issue with partial clipping of 12-lead ECG on Patient Monitor. Fixed an issue where the fetal heart sound was played in post delivery. Fixed an issue where HR would be shown as “?” when the measured heart rate is very low (e.g. in asystole). Fixed an issue where PM sometimes shows as a black screen when starting a new session. Fixed an issue where PM is not always shown on top after debriefing and starting a new session. General maintenance, bugfixes, and improvements.

exe

Laerdal Learning Application (LLEAP) - v. 6.4.1 (1556mb)

Main changes: LLEAP now supports the new "Nursing Anne Simulator" Added new ECG rhythm "Sinus 60 years" that represents a healthy 60-year-old patient. Changed default level for ST elevation in Sinus AMI rhythms. Changed default severity of Hyperkalemia rhythm. The "Theme" dropdown menu in LLEAP now allows selecting among all themes in the Themes folder. Added ability in profile editor to set the timeout before LLEAP session is automatically paused. Improved reporting of "examining eyes" on SimMan 3G in bright sunlight. Now possible to disable Wi-Fi on all simulator types Improved usability of "Simulator Firmware & Network Wizard" making it simpler to update simulators and configure their network settings. Fixed an issue where the SimMom EFM patterns- "Early decels" and "Variable decels" were crossed. Also, the "Synced decels" pattern would not generate the correct response to contractions if used in a user defined preset/pattern. Fixed an issue where VCA would not work correctly if the SimMan3G computer name was longer than 15 characters. Fixed an issue with connecting to a simulator if the simulator name contained the characters '.', ';' or '='. General maintenance, bugfixes, and improvements.

exe

Laerdal Learning Application (LLEAP) - patch v. 6.4.2 (130mb)

Update to LLEAP 6.4.1: Corrections to Simulator Firmware & Network Wizard to display locally hosted Network. Corrections to SimMan 3G to have compression artifacts on patient monitor. Corrections related to Link Box manikins. Occasionally the communications to instructor device stops. The update also include changes to SimMan 3G family simulators, remember to update Simulator.

exe

Laerdal Patient Monitor v. 6.5.0 (632mb)

IMPORTANT: If you received your SimMan 3G, SimMan Essential, SimMan Bleeding\Trauma Simulator this year please contact your local Laerdal representative before upgrading. The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer. General maintanance, bugfixes and improvements.

exe

Laerdal Learning Application (LLEAP) v. 6.5.0 (1155mb)

IMPORTANT: If you received your SimMan 3G, SimMan Essential, SimMan Bleeding\Trauma Simulator this year please contact your local Laerdal representative before upgrading. Main changes: LLEAP now supports the New simulator SimNewB. The product names for the first generation of SimNewB, SimBaby and SimMan simulators have now changed to "SimNewB Classic", "SimBaby Classic" and "SimMan Classic" in the LLEAP user interface Improved auscultation focus. Can now add to countdown timer (+30s button) and cancel the auscultation focus Improved presentation of composite events and set of item events to better utilize available screen Space. ECG curve speed can now be configured in profile. SimMom EFM: Changed default value of the Early deceleration severity to more clearly show an Early deceleration. Simulator Firmware & Network Wizard now allows downloading these from internet automatically (if connected to internet) or loading them from a USB memory stick. Optimized file transfer when multiple Instructor applications connected to same simulation. Updated the hosted network component, Connectify to the 2018 version Improved learner selection UI for A2P users. Fixed an issue where the VCA in some cases would play scambled audio. General maintenance, bugfixes and improvements. Before updating LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run the Visual C++ 2015 redistributable from this location: Link . Select and run 'vc_redist.x86.exe' then try running LLEAP. If using SimView with LLEAP then SimView Server Version 6.2 or later is required. We recommend you download and install the latest version from here Note that all computers in your simulator environment should use the same version of the LLEAP SW. Use the Simulator Firmware & Network Wizard to update your simulator after LLEAP has been updated. See help file for details.

exe

Laerdal Patient Monitor v. 6.6.0 (632mb)

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer. New version to align with LLEAP 6.6.0

exe

Laerdal Learning Application (LLEAP) v. 6.6.0 (1154mb)

Main change: LLEAP now supports the new simulator SimBaby. Other improvements and issues LLEAP now plays the "Grunt" and "Weak cry" vocal sound in synch with chest rise. If manikin does not breath it will not play the sound either. Fixed an issue where LLEAP could not update a SimPad Plus. Fixed an issue where real time ventilation rate for SimMan ALS was not updated in LLEAP. Fixed an issue where transitions in a theme or scenario could start before the LLEAP session started. Fixed an issue where icons in the Ongoing care window could remain visible after the event has stopped. Fixed an issue where trends for absorbed gases (O2, N2O etc) would not be executed correctly. Fixed an issue where auscultation focus on SimMan 3G could not be cancelled. Now the additional time exceeding 30 seconds can be cancelled. Fixed an issue where LLEAP could show an error message about "Trend doesn't exist" when starting a trend. Note: The product names for the first generation of SimNewB, SimBaby and SimMan simulators have changed to "SimNewB Classic", "SimBaby Classic" and "SimMan Classic" in the LLEAP user interface If using SimView with LLEAP then SimView Server Version 6.2 or later is required. We recommend you download and install the latest version from here All computers and simulators in your simulator environment should use the same version of the LLEAP SW. Use the Simulator Firmware & Network Wizard to update your simulator after LLEAP has been updated. See help file for details. Before updating LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run the Visual C++ 2015 redistributable from this location: Link . Select and run 'vc_redist.x86.exe' then try running LLEAP.

exe

Laerdal Patient Monitor v. 6.7.0 (713mb)

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer. Main Changes The Patient Monitor now has a simulated Defibrillator monitor and AED (SimStart). It is now possible to adjust the speed of 12 lead ECGs. This can be set in the profile editor as well as in the 12-lead window on Patient Monitor. There are now 4 different tiles in the Laerdal Simulation Home for launching Patient Monitor into the different modes. Fixed an issue where Patient Monitor would sometimes show blank information for Patient data and Learner brief. Fixed an issue where automatic Blood Pressure measurement didn't start after restarting a scenario. Fixed an issue where Patient Monitor could show the wrong radiology image if same filename was used for different images, from different folders.

exe

Laeerdal Learning Application (LLEAP) v. 6.7.0 (1265mb)

Main change: LLEAP now supports B-line Medical’s SimCapture as an integrated debriefing option. LLEAP now supports a simulated defibrillator monitor and AED (SimStart) as part of Patient Monitor. Other improvements and issues Introduced an additional "VT Type 2" rhythm which represents a monomorphic VT. Existing VT rhythm (more polymorphic) has been renamed to "VT Type 1". Improvements for running two instances of the Instructor Application connected to the same session. Added ability to have one eye fully open and one eye half open (SimMan only). Added support for 2cm/min EFM curve speed - this setting can be selected in profile editor. Improved handling of the “weak cry” and “grunting” sounds for SimBaby and SimNewB when controlled from a scenario. Looping on intervals will now work and still be synchronized with the breathing. It is now possible to set which “state” should be the initial state when creating a theme from within LLEAP Instructor Application. Either drag the state button to the top, or right click the state button and select "Set as initial state". Fixed an issue where the eye blinking setting in the UI was not updated. When running a physiological patient case, the case would not always show the correct auscultation sounds (shown as normal while in fact was abnormal), this has been fixed. Fixed an issue where setting the auscultation lung sound "Basal crackles" would show as "Custom" in the UI. Fixed an issue where Simulator Firmware & Network wizard would show that network configuration of a LinkBox Simulator failed when it actually succeeded. Fixed an issue where Simulator Firmware & Network wizard could ask to set a static IP if a simulator had a link-local address. Fixed an issue where LLEAP would crash when playing the sound "Difficulty breathing" in Spanish language. Fixed an issue where LLEAP, in some cases, would continue to start up normally (not showing an error message) even if failing to connect to a LinkBox simulator. Fixed an issue where LLEAP could fail to run on Windows with Turkish language. Fixed an issue with Temperature (TBlood and TPeri) displaying in Celsius on the Theme/State window even when using United States user preferences. Fixed an issue with doing silent installs on Windows 10. LLEAP will no longer allow installation on 32-bit Windows. General maintenance, bugfixes, and improvements. Note: The product names for the first generation of SimNewB, SimBaby and SimMan simulators have changed to "SimNewB Classic", "SimBaby Classic" and "SimMan Classic" in the LLEAP user interface If using SimView with LLEAP then SimView Server Version 6.2 or later is required. We recommend you download and install the latest version from here All computers and simulators in your simulator environment should use the same version of the LLEAP SW. Use the Simulator Firmware & Network Wizard to update your simulator after LLEAP has been updated. See help file for details. Before updating LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run the Visual C++ 2015 redistributable from this location: Link . Select and run 'vc_redist.x86.exe' then try running LLEAP.

exe

Laerdal Patient Monitor v. 6.7.0.4312 (713mb)

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer. New version to align with LLEAP 6.7.0.4312 The Patient Monitor now has a simulated Defibrillator monitor and AED (SimStart). It is now possible to adjust the speed of 12 lead ECGs. This can be set in the profile editor as well as in the 12-lead window on Patient Monitor. There are now 4 different tiles in the Laerdal Simulation Home for launching Patient Monitor into the different modes. Fixed an issue where Patient Monitor would sometimes show blank information for Patient data and Learner brief. Fixed an issue where automatic Blood Pressure measurement didn't start after restarting a scenario. Fixed an issue where Patient Monitor could show the wrong radiology image if same filename was used for different images, but in different folders. Patient Monitor will no longer allow installation on 32-bit Windows. General maintenance, bugfixes, and improvements.

exe

Laerdal Learning Application (LLEAP) v. 6.7.0.4312 (1265mb)

New features: LLEAP now supports B-line Medical’s SimCapture as an integrated debriefing option. LLEAP now supports a simulated defibrillator monitor and AED (SimStart) as part of Patient Monitor. Introduced an additional "VT Type 2" rhythm which represents a monomorphic VT. Existing VT rhythm (more polymorphic) has been renamed to "VT Type 1". Improvements for running two instances of the Instructor Application connected to the same session. Added ability to have one eye fully open and one eye half open (SimMan only). Added support for 2cm/min EFM curve speed - this setting can be selected in profile editor. Improved handling of the “weak cry” and “grunting” sounds for SimBaby and SimNewB when controlled from a scenario. Looping on intervals will now work and still be synchronized with the breathing. It is now possible to set which “state” should be the initial state when creating a theme from within LLEAP Instructor Application. Either drag the state button to the top, or right click the state button and select "Set as initial state". Bug fixes: Fixed an issue where the eye blinking setting in the UI was not updated. When running a physiological patient case, the case would not always show the correct auscultation sounds (shown as normal while in fact was abnormal), this has been fixed. Fixed an issue where setting the auscultation lung sound "Basal crackles" would show as "Custom" in the UI. Fixed an issue where Simulator Firmware & Network wizard would show that network configuration of a LinkBox Simulator failed when it actually succeeded. Fixed an issue where Simulator Firmware & Network wizard could ask to set a static IP if a simulator had a link-local address. Fixed an issue where LLEAP would crash when playing the sound "Difficulty breathing" in Spanish language. Fixed an issue where LLEAP, in some cases, would continue to start up normally (not showing an error message) even if failing to connect to a LinkBox simulator. Fixed an issue where LLEAP could fail to run on Windows with Turkish language. Fixed an issue with Temperature (TBlood and TPeri) displaying in Celsius on the Theme/State window even when using United States user preferences. Fixed an issue with doing silent installs on Windows 10. LLEAP will no longer allow installation on 32-bit Windows. General maintenance, bugfixes, and improvements.

exe

Laerdal Patient Monitor v. 6.8.0 (717mb)

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer. New version to align with LLEAP 6.8.0 Simulated AED and Defibrillator monitor (SimStart) now have translated voice prompts. Improved volume indicator on simulated AED/Defibrillator monitor. Fixed an issue where the NIBP auto measurement would be triggered too often. Fixed an issue where the NIBP measurement would sometimes be shown before activating the measurement. Fixed an issue where some buttons would not show after minimizing the Patient Monitor window. Fixed an issue where Patient Monitor in AED mode would sometimes crash. General maintenance, bugfixes and improvements.

exe

Laerdal Learning Application (LLEAP) v. 6.8.0 (1275mb)

Changes: Added support for SimBaby with Tracheostomy. Several improvements and adjustments to UI for SimNewB. Added a Stopwatch function. Click on the time-field next to the Play/Pause button on the Session control window to show the Stopwatch window.. Added a new pre-recorded vocal sound “OK” for Adult(Male/Female) and Child. Improved UI for Stomach distention function. Now have a separate “Release air” button. For SimJunior there is also a separate “Inflate” button. Fixed an issue where LLEAP would sometimes crash when ending a session. Fixed an issue where Tongue fallback was not working properly when running a scenario. Fixed an issue where transitions of User Defined Variables would not always end up on the correct value. General maintenance, bugfixes and improvements.

exe

Laerdal Learning Application (LLEAP) v. 6.8.1 (1225mb)

Changes in this release: Simulator lost connection - Improving error message. SimBaby - Improved trachostomy functionality to close Laryngospasm and open airways. SimBaby - Fixed issue with Pharyngeal obstruction not showing in Instructor Application for a virtual simulator. Themes - Now showing features related to available simulator. SimJunior - Fixed issue where simualtor did not show in simulator list. SimMom - Now possible to connect SimMom using Advanced option. LLEAP - Fixed issue related to changeing vital signs before starting session. LLEAP - Fixed issue related to application start. SimMan 3G - Fixed an issue where changes to tracheostoma opening is logged for SimMan 3G which is not supporting it. LLEAP - Fixed an issue where SessionViewer still shows state "Recording" if LLEAP selects to start a new session . Stop compression event - Fixed an issue where stopping simulated compression did not result in a "Stop compression" even.   Changes since 6.8.0: Added support for SimBaby with Tracheostomy. Several improvements and adjustments to UI for SimNewB. Added a Stopwatch function. Click on the time-field next to the Play/Pause button on the Session control window to show the Stopwatch window.. Added a new pre-recorded vocal sound “OK” for Adult(Male/Female) and Child. Improved UI for Stomach distention function. Now have a separate “Release air” button. For SimJunior there is also a separate “Inflate” button. Fixed an issue where LLEAP would sometimes crash when ending a session. Fixed an issue where Tongue fallback was not working properly when running a scenario. Fixed an issue where transitions of User Defined Variables would not always end up on the correct value.

exe

Laerdal Patient Monitor v. 6.8.1 (673mb)

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer. New version to align with LLEAP 6.8.1 Changes in this release: Defibrillator Monitor - Fixed issue with layout. Patient Monitor Layout - Fixed issue with hidden buttons after minimizing application. Metronom sound - Fixed issue where metronome sound did not start. ECG AV Block - Fixed issue with wrong HR on high heart rates. SimMom - Fixed issue where SimMom was listed twice in simulator list.   Changes since 6.8.0: Simulated AED and Defibrillator monitor (SimStart) now have translated voice prompts. Improved volume indicator on simulated AED/Defibrillator monitor. Fixed an issue where the NIBP auto measurement would be triggered too often. Fixed an issue where the NIBP measurement would sometimes be shown before activating the measurement. Fixed an issue where some buttons would not show after minimizing the Patient Monitor window. Fixed an issue where Patient Monitor in AED mode would sometimes crash.

exe

Laerdal Learning Application (LLEAP) v. 7.0.0 (1233mb)

Changes in this release: New functionality for integration with the new Laerdal Scenario Cloud. Addition in the User Interface for SimMan Essential to support the reactive eyes. For SimBaby tetherless, new events, being 'Insert advanced airway' and 'ventilation'. Improved network communication to Patient Monitor. Important: Use this version if you need Laerdal Scenario Cloud. Use this version if you are experiencing problems related to connectivity.  

exe

Laerdal Learning Application (LLEAP) v. 7.0.1 (1234mb)

Changes in this release: Fixed issue making Laryngospasm inaccessible for SimBaby with Tracheostomy. Fixed an issue causing the female simulators voice to be Male. Improved handling of compressor warnings for high altitudes. Improved handling of Scenario Cloud synchronization realted to long file names. General maintenance, bugfixes and improvements.   Changes since 7.0.0: New functionality for integration with the new Laerdal Scenario Cloud. Addition in the User Interface for SimMan Essential to support the reactive eyes. For SimBaby tetherless, new events, being 'Insert advanced airway' and 'ventilation'. Improved network communication to Patient Monitor.   Important: Use this version if you need Laerdal Scenario Cloud. Use this version if you are experiencing problems related to connectivity.   Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location: Microsoft Visual C++ 2015 Redistributable Update 3 . Select and run vc_redist.x86 then try running LLEAP.   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.

exe

Laerdal Patient Monitor v. 7.0.1 (679mb)

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.   New version to align with LLEAP 7.0.1 Changes in this release: Added functionality for enabling the Patient Monitor connect directly towards a SimMom. Fixed an issue where EFM - 3 cm/min. is displaying as 1 cm/min. General maintenance, bugfixes and improvements.   Changes since 6.8.0: Improved network communication to Patient Monitor.   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.

exe

Laerdal Patient Monitor v. 7.1.0 (718mb)

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.   New version to align with LLEAP 7.1.0 Changes in this release: Support for custom vital signs on Patient Monitor (extended user defined variables). Improved communication between Patient Monitor and SimPad/SimPad PLUS.   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.

exe

Laerdal Learning Application (LLEAP) v. 7.1.0 (1320mb)

Changes in this release: Support for custom vital signs on Patient Monitor (extended user defined variables). Removed Shockwave Flash. Removed Connectify. Removed EloSetup and EloInterface. Fixed an issue causing LLEAP downloads to be corrupted. Fixed an issue causing sound issues on SimBaby and SimNewB. SimCapture now allows to select specific regions. General maintenance, bugfixes and improvements.   Important: The applications that has been removed from the installer (Flash, Connectify and Elo) will not be uninstalled from existing installations. Use this version if you need Laerdal Scenario Cloud. Use this version if you are experiencing problems related to connectivity.   Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location: Microsoft Visual C++ 2015 Redistributable Update 3 . Select and run vc_redist.x86 then try running LLEAP.   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.

exe

Laerdal Patient Monitor v. 7.2.0 (911mb)

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.   New version to align with LLEAP 7.2.0   Changes in this release: Fixed an issue where the SpO2 vital parameter did not disappear as expected.   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network. Windows 7 By the end of 2020 new releases of LLEAP will no longer support Windows 7

exe

Laerdal Learning Application (LLEAP) v. 7.2.0 (1657mb)

Changes in this release: Changed authentication provider to align with changes in Scenario Cloud. Added an alert for PC or tablet users of Windows 7 as it will no longer be supported for new releases in 2021. Improved discovery of manikins and patient monitors. Improved handling of updates and configuration for SimMan 3G. Fixed an issue where the name of SimMan 3G could not be changed. Fixed an issue where the SpO2 vital parameter did not disappear as expected. Fixed an issue where the "Ok" button would not allow you to proceed in the theme selection dialog. Improved handling of log files for SimMan 3G. Removed Shockwave Flash. General maintenance, bugfixes, and improvements.   Important: Once upgrading to 7.2.0 with Scenario Cloud the organization account is transferred to a new login authentication system and so cannot revert back to 7.1.0 or earlier.   Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location: Microsoft Visual C++ 2015 Redistributable Update 3 . Select and run vc_redist.x86 then try running LLEAP.   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 on, the equipment will need to use a separate simulation network. Laerdal can help you connect all your simulation equipment to a dedicated network. Learn more and get started at Laerdal.com/Network. Windows 7 By the end of 2020 new releases of LLEAP will no longer support Windows 7

exe

LLEAP_7.2.0_Scenario_Cloud_Security_update

This update is needed for LLEAP when using Laerdal Scenario Cloud as of now. Using 7.2 this patch is needed to: Synchronize scenarios Sign in as a Scenario Cloud user Validating the LSC subscription after a 30 day offline period

exe

Laerdal Learning Application (LLEAP) v. 7.3.0 (1526mb)

Important: You may receive a "Windows Defender SmartScreen prevented an unrecognized app from running" Error Message when installing LLEAP. Explanation and how to handle this is explained here: https://laerdal.force.com/HelpCenter/s/article/How-to-handle-error-message-Windows-Defender-SmartScreen-prevented-an-unrecognized-app-from-running.   Changes in this release: New Device Connection Manager (DCM) application to manage network configurations more efficiently on multiple manikins. Enhanced support for Enterprise Network Security from SFNW & for SimMan3G with Wifi USB adapter. Fixed an issue where SimMan3G system time was not synced. Improved simulator connection on networks with high latency. Included WiFi driver to LLEAP installer (for SOM on SimMan3G). Fixed an issue where the simulation wouldn't use the wanted simulation profile unless explicitly selected. Could lead to using wrong units and similar problems. LLEAP supports transport layer security (TLS) 1.2 or greater for login to Scenario Cloud. Fixed an issue causing help files not to work.   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 on, the equipment will need to use a separate simulation network. Laerdal can help you connect all your simulation equipment to a dedicated network. Learn more and get started at Laerdal.com/Network. Last LLEAP version supporting Windows 7 LLEAP 7.3 will be the last version that supports Windows 7. Last version supporting old SimMan 3G family simulators Due to end of life for Windows XP Embedded used on older SimMan3G simulators, LLEAP will no longer supported as of this version, this applies to the following simulators - unless they have been upgraded to use Windows 7: SimMan3G simulators with serial numbers lower than 212-16140000 SimMan3G Essential simulators with serial numbers lower than 213-16140000 SimMan3G Essential Bleeding simulators with serial numbers lower than 214-1614000 Windows Update Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location: Microsoft Visual C++ 2015 Redistributable Update 3. . Select and run vc_redist.x86 then try running LLEAP.

exe

Laerdal PatientMonitor v. 7.3.0 (932mb)

Important: You may receive a "Windows Defender SmartScreen prevented an unrecognized app from running" Error Message when installing LLEAP. Explanation and how to handle this is explained here: How to handle error message "Windows Defender SmartScreen prevented an unrecognized app from running"? .   The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.   Changes in this release: New version to align with LLEAP 7.3.0 General maintenance, bugfixes and improvements.   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network. Windows 7 Laerdal Patient Monitor 7.3 will be the last version that supports Windows 7

Contáctenos

Formulario de contacto

Formulario de contacto

¿Cómo prefiere que hagamos contacto con usted?
<p>Trataremos sus datos con cuidado de acuerdo con la <a href="/la/support/customer-service/privacy-policy/" target="_blank" rel="noopener">Política de Privacidad de Laerdal</a>.</p>

Trataremos sus datos con cuidado de acuerdo con la Política de Privacidad de Laerdal.

Devoluciones

Devoluciones

<p>Trataremos sus datos con cuidado de acuerdo con la <a href="/la/support/customer-service/privacy-policy/" target="_blank" rel="noopener">Política de Privacidad de Laerdal</a>.</p>

Trataremos sus datos con cuidado de acuerdo con la Política de Privacidad de Laerdal.

Servicio técnico

Servicio técnico

<p>Trataremos sus datos con cuidado de acuerdo con la <a href="/la/support/customer-service/privacy-policy/" target="_blank" rel="noopener">Política de Privacidad de Laerdal</a>.</p>

Trataremos sus datos con cuidado de acuerdo con la Política de Privacidad de Laerdal.