Gå vidare till

LLEAP – simuleringsprogramvara

Laerdal Learning Application
Gå till avsnittet

Enkelhet och kontroll

Samma intuitiva gränssnitt till alla Laerdal-simulatorer

Med LLEAP har instruktörerna kontroll över patientsimulatorns fysiologi, för att ge deltagarna träning i en uppslukande helhetsupplevelse. LLEAP integreras helt med Laerdals simulatorer, tillbehörsprodukter, Laerdal Scenario Cloud och SimCapture och gör det möjligt att kontrollera simulatorns fysiologi och alla andra parametrar i din träningssession – både in-situ och i simuleringscenter.

Scenarioträning blir enklare med LLEAP. Kör "oplanerat” eller använd förprogrammerade scenarion för ett enkelt och effektivt sätt att köra storskaliga simuleringar.

Med bara en LLEAP-dator kan du kontrollera alla simulatorer som är kompatibla med LLEAP på anläggningen.Om du vill ha en ännu rörligare lösning kan du välja SimPad PLUS

Ta din simulering till en ny nivå

  • Välj er LLEAP-lösning
  • LLEAP simulatorer
  • Patientövervakning
  • SimStart – monitordefibrillator
  • LLEAP eller SimPad PLUS?
  • Utbildningstjänster
  • Tekniska tjänster
  • Videoguider

Välj er LLEAP-lösning

3 LLEAP LICENSER: 

LLEAP Standard
En komplett LLEAP-licens som ger en enhetlig kontroll över alla datorstyrda Laerdal-simulatorer och gör simuleringsträningen enkel att genomföra. Inkluderar simulerad patientmonitor, monitordefibrillator och hjärtstartare.

LLEAP Fundamentals
Med LLEAP Fundamentals kan ni genomföra utbildning med hjälp av färdighetstränare och standardiserade patienter med en simulerad patientmonitor.

LLEAP Lite
LLEAP Lite är gratis att ladda ned och ger möjlighet att öva på att använda LLEAP. Testa scenarion bekvämt på din egen dator.

LLEAP simulatorer

Laerdals simulatorer som är kompatibla med LLEAP

  1. SimMan 3G
  2. SimMan 3G Trauma
  3. SimMan ALS
  4. SimMan Essential
  5. SimMom
  6. SimBaby
  7. SimBaby Classic
  8. SimNewB
  9. SimNewB Classic
  10. SimJunior
  11. Simulatorn Nursing Anne
  12. ALS Simulator
  13. SimMan Classic
  14. SimMan 3G Mystic
  15. SimMan Essential Bleeding

Patientövervakning

Patientövervakning med LLEAP

Ta simulering till nästa nivå med realistisk patientövervakning

LLEAP-plattformen inkluderar simulerat övervakningsprogram och simulerad monitordefibrillator/hjärtstartare.

Ge kursdeltagarna en uppslukande och realistisk erfarenhet genom att låta dem öva med både simulator och patientmonitor. Det förstärker den kliniska realismen och uppmuntrar studenterna till kritiskt tänkande. Lägg också till labbrapporter, röntgenbilder och multimedia för att ytterligare förstärka simuleringen.

Simulerade parametrar
LLEAP:s patientövervakning ger koncis klinisk återkoppling på fysiska parametrar, däribland:

  • EKG
  • SpO2
  • CO2
  • ABP
  • CVP
  • PAP
  • NIBP
  • TOF
  • …och många fler.

SimStart – monitordefibrillator

SimStart – monitordefibrillator

SimStart är en bärbar och prisvärd lösning för simuleringsövningar med hjärtstartare eller defibrilleringsmonitor. Integrera SimStart med valfri docka eller patientsimulator från Laerdal och skapa heltäckande och realistisk simuleringsträning.

SimStart

SimStart_productOnlyII.JPG

LLEAP eller SimPad PLUS?

LLEAP på dator eller LLEAP för SimPad?

De flesta Laerdal-simulatorer har två driftlägen. Utifrån era behov kan ni välja att köra LLEAP på dator eller på en SimPad PLUS.

LLEAP på dator
  • LLEAP kan installeras på en bärbar dator, surfplatta, robust surfplatta eller paneldator som styrsätt för en befintlig simulator.
  • Styrning från dator är idealiskt vid användning från ett kontrollrum med flera träningsrum, kamerasystem eller andra funktioner som används av simuleringscenter.
  • Datorstyrning stödjer mer avancerade funktioner jämfört med SimPad PLUS, inklusive ytterligare parametrar på patientmonitorn, röntgen, multimediaintegrering, utökad och anpassad vy över användargränssnittet och mycket mer.
  • Med en dator kan ni integrera lösningar från tredje part, till exempel VitalsBride patientövervakning och SonoSim ultraljudslösningar.
LLEAP till SimPad PLUS
  • Det här är en separat version av LLEAP-programvaran. Den används för att styra alla SimPad PLUS-styrda dockor och simulatorer.
  • SimPad PLUS kan plockas upp och användas på ett ögonblick.
  • Den är bärbar och idealisk för in situ-träning.

Läs mer om SimPad PLUS

Utbildningstjänster

Utbildningstjänster

Ge dina instruktörer kunskap och insikter om hur de använder Laerdals produkter på bästa sätt för att träna, motivera och undervisa studenter i livräddande färdigheter.

Välj bland en lång rad tjänster och kurser – från kom-igång-kursen, undervisa med LLEAP och hjälp att utforma scenarion till repetitionskurser för att bibehålla aktuell kunskap.

Utbildningstjänster från Laerdal

Tekniska tjänster

Tekniska tjänster

Få simulatorutrustningen att hålla längre med uppföljning genom Laerdals tekniska tjänster.

Vi erbjuder ett omfattande program av tekniska tjänster för att uppfylla era specifika behov vad gäller produkter och utbildning. Vårt tekniska serviceteam kan också ge stöd vid utbyggnad och drift av ert kliniska laboratorium. Med våra kunniga, välutbildade tekniska ingenjörer runtom i världen finns vi här för att hjälpa till.

Tekniska tjänster

Videoguider

Videoguider

Titta på videoguiderna för att komma igång.

Instruktionsvideor för LLEAP

SimCapture

Effektiv simulering

SimCapture är en komplett lösning för att hantera inspelning, utvärdering och debriefing för simuleringsträning. Både på plats och in-situ.

Spela in ljud, video, kommentarer, patientskärmar och simulatordata i ett enda webbaserat gränssnitt.

SimCapture

Översikt

Produktnedladdningar

Användarhandböcker

pdf

SimStart User Guide (3mb)

Simulated AED or Monitor Defibrillator training functionality available in Laerdal Learning Application- LLEAP

Viktig information

pdf

Laerdal Network Requirement Document

This document describes the requirements for setting up a network on pre-existing infrastructure specifically for Laerdal simulation devices. Replaces LLEAP IT & Network Information document

Programvara

Session Viewer Downloads

Use this link to download latest software to Session Viewer

SimView Downloads

Use this link to download latest software to SimView

SimView Mobile Downloads

Use this link to download latest software to SimView Mobile

exe

Laerdal Learning Application (LLEAP) v. 6.8.1 (1225mb)

Changes in this release: Simulator lost connection - Improving error message. SimBaby - Improved trachostomy functionality to close Laryngospasm and open airways. SimBaby - Fixed issue with Pharyngeal obstruction not showing in Instructor Application for a virtual simulator. Themes - Now showing features related to available simulator. SimJunior - Fixed issue where simualtor did not show in simulator list. SimMom - Now possible to connect SimMom using Advanced option. LLEAP - Fixed issue related to changeing vital signs before starting session. LLEAP - Fixed issue related to application start. SimMan 3G - Fixed an issue where changes to tracheostoma opening is logged for SimMan 3G which is not supporting it. LLEAP - Fixed an issue where SessionViewer still shows state "Recording" if LLEAP selects to start a new session . Stop compression event - Fixed an issue where stopping simulated compression did not result in a "Stop compression" even.   Changes since 6.8.0: Added support for SimBaby with Tracheostomy. Several improvements and adjustments to UI for SimNewB. Added a Stopwatch function. Click on the time-field next to the Play/Pause button on the Session control window to show the Stopwatch window.. Added a new pre-recorded vocal sound “OK” for Adult(Male/Female) and Child. Improved UI for Stomach distention function. Now have a separate “Release air” button. For SimJunior there is also a separate “Inflate” button. Fixed an issue where LLEAP would sometimes crash when ending a session. Fixed an issue where Tongue fallback was not working properly when running a scenario. Fixed an issue where transitions of User Defined Variables would not always end up on the correct value.

exe

Laerdal Patient Monitor v. 6.8.1 (673mb)

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer. New version to align with LLEAP 6.8.1 Changes in this release: Defibrillator Monitor - Fixed issue with layout. Patient Monitor Layout - Fixed issue with hidden buttons after minimizing application. Metronom sound - Fixed issue where metronome sound did not start. ECG AV Block - Fixed issue with wrong HR on high heart rates. SimMom - Fixed issue where SimMom was listed twice in simulator list.   Changes since 6.8.0: Simulated AED and Defibrillator monitor (SimStart) now have translated voice prompts. Improved volume indicator on simulated AED/Defibrillator monitor. Fixed an issue where the NIBP auto measurement would be triggered too often. Fixed an issue where the NIBP measurement would sometimes be shown before activating the measurement. Fixed an issue where some buttons would not show after minimizing the Patient Monitor window. Fixed an issue where Patient Monitor in AED mode would sometimes crash.

exe

Laerdal Patient Monitor v. 7.2.0 (911mb)

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.   New version to align with LLEAP 7.2.0   Changes in this release: Fixed an issue where the SpO2 vital parameter did not disappear as expected.   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network. Windows 7 By the end of 2020 new releases of LLEAP will no longer support Windows 7

exe

Laerdal Learning Application (LLEAP) v. 7.2.0 (1657mb)

Changes in this release: Changed authentication provider to align with changes in Scenario Cloud. Added an alert for PC or tablet users of Windows 7 as it will no longer be supported for new releases in 2021. Improved discovery of manikins and patient monitors. Improved handling of updates and configuration for SimMan 3G. Fixed an issue where the name of SimMan 3G could not be changed. Fixed an issue where the SpO2 vital parameter did not disappear as expected. Fixed an issue where the "Ok" button would not allow you to proceed in the theme selection dialog. Improved handling of log files for SimMan 3G. Removed Shockwave Flash. General maintenance, bugfixes, and improvements.   Important: Once upgrading to 7.2.0 with Scenario Cloud the organization account is transferred to a new login authentication system and so cannot revert back to 7.1.0 or earlier.   Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location: Microsoft Visual C++ 2015 Redistributable Update 3 . Select and run vc_redist.x86 then try running LLEAP.   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 on, the equipment will need to use a separate simulation network. Laerdal can help you connect all your simulation equipment to a dedicated network. Learn more and get started at Laerdal.com/Network. Windows 7 By the end of 2020 new releases of LLEAP will no longer support Windows 7

exe

LLEAP_7.2.0_Scenario_Cloud_Security_update

This update is needed for LLEAP when using Laerdal Scenario Cloud as of now. Using 7.2 this patch is needed to: Synchronize scenarios Sign in as a Scenario Cloud user Validating the LSC subscription after a 30 day offline period

exe

Laerdal Learning Application (LLEAP) v. 7.3.0 (1526mb)

Important: You may receive a "Windows Defender SmartScreen prevented an unrecognized app from running" Error Message when installing LLEAP. Explanation and how to handle this is explained here: https://laerdal.force.com/HelpCenter/s/article/How-to-handle-error-message-Windows-Defender-SmartScreen-prevented-an-unrecognized-app-from-running.   Changes in this release: New Device Connection Manager (DCM) application to manage network configurations more efficiently on multiple manikins. Enhanced support for Enterprise Network Security from SFNW & for SimMan3G with Wifi USB adapter. Fixed an issue where SimMan3G system time was not synced. Improved simulator connection on networks with high latency. Included WiFi driver to LLEAP installer (for SOM on SimMan3G). Fixed an issue where the simulation wouldn't use the wanted simulation profile unless explicitly selected. Could lead to using wrong units and similar problems. LLEAP supports transport layer security (TLS) 1.2 or greater for login to Scenario Cloud. Fixed an issue causing help files not to work.   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 on, the equipment will need to use a separate simulation network. Laerdal can help you connect all your simulation equipment to a dedicated network. Learn more and get started at Laerdal.com/Network. Last LLEAP version supporting Windows 7 LLEAP 7.3 will be the last version that supports Windows 7. Last version supporting old SimMan 3G family simulators Due to end of life for Windows XP Embedded used on older SimMan3G simulators, LLEAP will no longer supported as of this version, this applies to the following simulators - unless they have been upgraded to use Windows 7: SimMan3G simulators with serial numbers lower than 212-16140000 SimMan3G Essential simulators with serial numbers lower than 213-16140000 SimMan3G Essential Bleeding simulators with serial numbers lower than 214-1614000 Windows Update Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location: Microsoft Visual C++ 2015 Redistributable Update 3. . Select and run vc_redist.x86 then try running LLEAP.

exe

Laerdal PatientMonitor v. 7.3.0 (932mb)

Important: You may receive a "Windows Defender SmartScreen prevented an unrecognized app from running" Error Message when installing LLEAP. Explanation and how to handle this is explained here: How to handle error message "Windows Defender SmartScreen prevented an unrecognized app from running"? .   The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.   Changes in this release: New version to align with LLEAP 7.3.0 General maintenance, bugfixes and improvements.   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network. Windows 7 Laerdal Patient Monitor 7.3 will be the last version that supports Windows 7

exe

Laerdal Patient Monitor v. 8.0.0 (933mb)

Important: You may receive a "Windows Defender SmartScreen prevented an unrecognized app from running" Error Message when installing LLEAP. Explanation and how to handle this is explained here: How to handle error message "Windows Defender SmartScreen prevented an unrecognized app from running"? .   The Laerdal Patient Monitor software is compatible with LLEAP and SimPad. Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.   Changes in this release: New version to align with LLEAP 8.0.0 General maintenance, bugfixes and improvements.   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network. Windows 7 Laerdal Patient Monitor 7.3 will be the last version that supports Windows 7

exe

Laerdal Learning Application (LLEAP) v. 8.0.0 (1532mb)

Important: You may receive a "Windows Defender SmartScreen prevented an unrecognized app from running" Error Message when installing LLEAP. Explanation and how to handle this is explained here: https://laerdal.force.com/HelpCenter/s/article/How-to-handle-error-message-Windows-Defender-SmartScreen-prevented-an-unrecognized-app-from-running.   Version 8.0.0 of LLEAP contains the following new functionality: Support for the new SimMan 3G PLUS. New updater for SimMan 3G simulators, providing a more reliable update experience, and improved progress feedback. Support for Nursing Anne Geriatric, allowing Nursing Anne Simulators that are using the new geriatric skin to use geriatric vocal sounds.   In addition, the version contains some important compatibility changes: Link Box Classic will no longer be supported. Running LLEAP on Windows 7 computers will no longer be supported. Older SimMan 3G simulators using Windows XP Embedded will no longer be supported.   Note: Updating to Windows 10? Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor? Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 on, the equipment will need to use a separate simulation network. Laerdal can help you connect all your simulation equipment to a dedicated network. Learn more and get started at Laerdal.com/Network. Windows Update Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location: Microsoft Visual C++ 2015 Redistributable Update 3. . Select and run vc_redist.x86 then try running LLEAP.

Kontakta oss

Be om mer information

Be om mer information

Hur föredrar du att bli kontaktad?
<p>Vi hanterar dina personliga kontaktuppgifter med stor omsorg, i enlighet med <a href="/se/support/customer-service/privacy-policy/" target="_blank" rel="noopener">Laerdals integritetspolicy</a>.</p>

Vi hanterar dina personliga kontaktuppgifter med stor omsorg, i enlighet med Laerdals integritetspolicy.

Returnering

Returnering

<p>Vi hanterar dina personliga kontaktuppgifter med stor omsorg, i enlighet med <a href="/se/support/customer-service/privacy-policy/" target="_blank" rel="noopener">Laerdals integritetspolicy</a>.</p>

Vi hanterar dina personliga kontaktuppgifter med stor omsorg, i enlighet med Laerdals integritetspolicy.

Teknisk Support

Teknisk Support

<p>Vi hanterar dina personliga kontaktuppgifter med stor omsorg, i enlighet med <a href="/se/support/customer-service/privacy-policy/" target="_blank" rel="noopener">Laerdals integritetspolicy</a>.</p>

Vi hanterar dina personliga kontaktuppgifter med stor omsorg, i enlighet med Laerdals integritetspolicy.