Downloads for SimNewB

User Guide, SimNewB (SV)

10.4 MB - Swedish
November. 24. 2022

User Guide, SimNewB (EN)

9.1 MB - English
November. 24. 2022

IPI for SimNewB Tetherless

5.1 MB - Multilingual
August. 12. 2022

Rev F

NRP Case Guides - Conducting a Simulation with NRP Theme

1.6 MB - English
October. 7. 2021

NRP Case Guides - Instructor Resources

0.2 MB - English
October. 7. 2021

NRP Case Guide 10 - Resuscitation of one day old Newborn in Mothers Hospital Room

0.4 MB - English
October. 7. 2021

NRP Case Guide 11 - Ethics and Care at the End of Life

0.3 MB - English
October. 7. 2021

NRP Case Guide 7 - Resuscitation with PPV, Alt Airway, Chest Compressions, Epinephrine and Volume

0.3 MB - English
October. 7. 2021

NRP Case Guide 8 - Resuscitation of a Newborn with Obstructed Airway

0.5 MB - English
October. 7. 2021

NRP Case Guide 9 - Resuscitation of Late Preterm Newborn with Initial Newborn Care and CPAP

0.4 MB - English
October. 7. 2021

NRP Case Guide 5 - Resuscitation with PPV and Endotracheal Intubation

0.5 MB - English
October. 7. 2021

NRP Case Guide 6 - Resuscitation with PPV, Alternative Airway and Chest Compressions

0.3 MB - English
October. 7. 2021

NRP Case Guide 3 - Resuscitation Requiring Positive Pressure Ventilation

0.6 MB - English
October. 7. 2021

NRP Case Guide 4 - Resuscitation with PPV and CPAP

0.6 MB - English
October. 7. 2021

NRP Case Guide 1 - An Uncomplicated Birth

0.4 MB - English
October. 7. 2021

NRP Case Guide 2 - Newborn Requiring Initial Steps of Newborn Care and Free flow Oxygen

0.4 MB - English
October. 7. 2021

SimNewB Sell Sheet

1.9 MB - English
March. 9. 2020

SimPad PLUS download page

December. 1. 2021

LLEAP download page

December. 1. 2021

Kostnadsfria simulationsscenarion

- Swedish
January. 17. 2019

Får ut det mesta av din simulator

USB 3.0 patch for ELO Monitor

74.5 MB
October. 31. 2014

With this patch it is possible to communicate between the ELO monitor and laptops via a USB 3.0 port. The patch also supports newer versions of the ELO monitor and is compatible with Windows 7 software. The patch addresses the following patient simulator versions (only): SimMom 1.0.0 SimBaby 1.6 SimMan 3.5 SimNewB 1.4 SimNewB for VS2 2.0.1.77 ALS Sim Adv 1.1 ALS Sim Adv for VS2 2.0.0.122 SimJunior 1.0.2 SimJunior for VS2 2.0.0.56 SimMan3G 2.3.4 Notice that you have to re-apply the patch if you install additional patient simulators on your computer. Future versions of the simulators will contain the new ELO driver and do not need the patch. However, if you combine a future version with any of the versions listed above, the patch is mandatory. PLEASE NOTE: You must also use the latest version of the Laerdal Debrief Viewer

SimNewB Advanced Software 2.0.1.77 for SimPad Link Box

316.8 MB - Multilingual
April. 4. 2013

• For PC operation with the SimPad Link Box only (This software will not work with VitalSim control unit)
• SimPad Link Box must be operating SimPad Software version 1.0.7 up to v 1.7.5 NOTE: Do not use SimPad SW 5.0.x or higher as this SW is not suitable for the Legacy Instructor Application. Download the latest software from the software section on the SimPad page.
• The SimNewB Advanced version software will only work with ELO touchsceen monitors. Not for use with SimPad Portable Patient Monitor or SimPad 17" Patient Monitors.

SimNewB

258.2 MB - English
November. 30. 2011

SimNewB Instructor Application Software was discontinued September 2014 and replaced by Laerdal Learning Application (LLEAP) Software. Laerdal will ensure availability and support of Instructor Application (latest software version 1.4.2) for a minimum of five years from the date of discontinuation. No additional improvements or modifications will be made to the Instructor Application. In order to access the latest software advancements available for your simulator, please learn more about LLEAP.

SimNewB STANDARD Software Version 1.3

38.0 MB - English
May. 13. 2010

SimNewB Standard Version 1.3. The SimNewB Standard Software have been updated to version 1.3. If you use both the Advanced and Standard SoftWare on your computer you need to upgrade both.