HomeDownloadsDownloads for SimNewB

Downloads for SimNewB



Directions for Use

User Guide, SimNewB (BR)

10.4 MB
11/24/2022

User Guide, SimNewB (ES)

10.4 MB - Spanish
11/24/2022

User Guide, SimNewB (EN)

9.1 MB - English
11/24/2022

IPI for SimNewB Tetherless

5.1 MB - Multilingual
08/12/2022

Rev F

Software

LLEAP download page


12/01/2021

Complimentary Simulation Scenarios

- English
09/03/2018

Obtain scenarios that will help you get the most out of your simulation training
USB 3.0 patch for ELO Monitor

74.5 MB
10/31/2014

With this patch it is possible to communicate between the ELO monitor and laptops via a USB 3.0 port. The patch also supports newer versions of the ELO monitor and is compatible with Windows 7 software. The patch addresses the following patient simulator versions (only): SimMom 1.0.0 SimBaby 1.6 SimMan 3.5 SimNewB 1.4 SimNewB for VS2 2.0.1.77 ALS Sim Adv 1.1 ALS Sim Adv for VS2 2.0.0.122 SimJunior 1.0.2 SimJunior for VS2 2.0.0.56 SimMan3G 2.3.4 Notice that you have to re-apply the patch if you install additional patient simulators on your computer. Future versions of the simulators will contain the new ELO driver and do not need the patch. However, if you combine a future version with any of the versions listed above, the patch is mandatory. PLEASE NOTE: You must also use the latest version of the Laerdal Debrief Viewer
SimNewB Advanced Software 2.0.1.77 for SimPad Link Box

316.8 MB - Multilingual
04/04/2013

  • For PC operation with the SimPad Link Box only (This software will not work with VitalSim control unit)
  • SimPad Link Box must be operating SimPad Software version 1.0.7 up to v 1.7.5 NOTE: Do not use SimPad SW 5.0.x or higher as this SW is not suitable for the Legacy Instructor Application. Download the latest software from the software section on the SimPad page.
  • The SimNewB Advanced version software will only work with ELO touchsceen monitors. Not for use with SimPad Portable Patient Monitor or SimPad 17" Patient Monitors.
SimNewB

258.2 MB - English
11/30/2011

SimNewB Instructor Application Software was discontinued September 2014 and replaced by Laerdal Learning Application (LLEAP) Software. Laerdal will ensure availability and support of Instructor Application (latest software version 1.4.2) for a minimum of five years from the date of discontinuation. No additional improvements or modifications will be made to the Instructor Application. In order to access the latest software advancements available for your simulator, please learn more about LLEAP.
SimNewB STANDARD Software Version 1.3

38.0 MB - English
05/13/2010

SimNewB Standard Version 1.3. The SimNewB Standard Software have been updated to version 1.3. If you use both the Advanced and Standard SoftWare on your computer you need to upgrade both.

Copyright 2024 Laerdal Medical. All Rights Reserved.